Description
Product Description
The INCRA MITER1000SE is designed for woodworkers who want precise, repeatable angle settings at the table saw. Its AngleLOCK Indexing System provides 41 positive angle stops in 5° increments across a full 180° range, with additional stops at 22.5° and 67.5° for commonly used miter angles.
For settings between the fixed stops, the stainless steel vernier cursor provides 0.1° resolution for fine angle adjustment. The GlideLOCK Miter Bar uses six expansion disks to adjust both sides of the bar, helping eliminate side-to-side play while maintaining smooth travel in standard 3/4″ x 3/8″ and near-standard miter slots.
The Special Edition INCRA-LOCK fence telescopes from 18″ to 31″, providing added support for a variety of workpiece sizes. Combined with the included Dual Flip Shop Stop and INCRA’s Automatic Positioning Control, the MITER1000SE is built for everything from 90° crosscuts and picture frames to complex multi-sided projects.
Features
- AngleLOCK Indexing System provides 41 positive angle stops
- Angle settings are indexed in 5° increments across a full 180° range
- Additional positive stops at 22.5° and 67.5°
- Stainless steel vernier cursor provides 0.1° resolution between fixed angle stops
- GlideLOCK Miter Bar uses six expansion disks to help eliminate side-to-side play
- Designed for smooth travel in standard 3/4″ x 3/8″ and near-standard miter gauge slots
- Special Edition INCRA-LOCK fence telescopes from 18″ to 31″
- Dual Flip Shop Stop supports repeatable workpiece positioning
- INCRA Automatic Positioning Control provides precise fence stop adjustment
- Suitable for crosscuts, picture frames, miters, and multi-sided projects
Specifications
- Model: MITER1000SE
- Product Type: Special Edition miter gauge
- Angle Range: 180°
- Positive Angle Stops: 41
- Angle Stop Increments: 5°
- Special Angle Stops: 22.5° and 67.5°
- Vernier Resolution: 0.1°
- Fence Length: Telescopes from 18″ to 31″
- Miter Bar Compatibility: Standard 3/4″ x 3/8″ and near-standard miter gauge slots
- GlideLOCK Adjustment: Six expansion disks
Comes With
- MITER1000SE miter gauge
- GlideLOCK Miter Bar
- Special Edition telescoping INCRA-LOCK fence
- Dual Flip Shop Stop
- Stainless steel vernier cursor
FAQ
What angle settings does the MITER1000SE provide?
The AngleLOCK system provides 41 positive stops in 5° increments across a 180° range, along with special stops at 22.5° and 67.5°.
Can the MITER1000SE be adjusted between the fixed angle stops?
Yes. The stainless steel vernier cursor provides 0.1° resolution for precise settings between the indexed positions.
How long is the included fence?
The Special Edition INCRA-LOCK fence telescopes from 18″ to 31″.
What size miter slots does the GlideLOCK bar fit?
It is designed for standard 3/4″ x 3/8″ and near-standard miter gauge channels.
How does the GlideLOCK Miter Bar reduce play?
It uses six expansion disks that adjust both sides of the bar to help eliminate side-to-side movement in the miter slot.
What types of cuts is the MITER1000SE designed for?
It can be used for standard 90° crosscuts, picture-frame miters, angled cuts, and precise multi-sided projects.
