Description
Type – Glue Joint Rip (GLR) Saw Blade
Diameter – 12″
Teeth – 50
Kerf – 0.134″
Plate – 0.094″
Hook – 0 Degree
Bore – 1″
These smoother cutting saws are used for edge glued stock. Special ground teeth with 0 deg. radial clearance allows these saws to cut smoother. Bores can be enlarged to fit your spindle size. Call for other sizes of GLR blades.
Warning: The use of saws on moulders requires you to have anti-kickback devices installed to prevent possible injury to the infeed operator.
