Description
DESCRIPTION:
VIRNIG SBS72-UT–V40 ANGLE SNOW BLADE
Snow plow attachment designed for compact tractors and small skid steers.
FEATURE:
•4° side-to-side oscillation follows uneven surfaces
•Angle the blade 28° left or right
•Trip edge protects operator & equipment
•5/8” x 8” reversible steel bolt-on edge allows 5 ½” of wear
•Standard with Manual Angle. One-Cylinder and Two-Cylinder Hydraulic Angle options available.
OPTIONS:
ONE-CYLINDER HYDRAULIC ANGLE
•Allows the operator to control the blade angle from inside the cab.
TWO-CYLINDER HYDRAULIC ANGLE
•Allows the operator to control the blade angle from inside the cab.
•Hydraulic crossover relief valve helps protect the attachment by absorbing shock by angling the entire blade if a curb or other object is struck.
QUICK TACH SHOES
•Provides a consistent stopping/bottoming point for compact tractor loader arms and helps keep the blade level.
POLY EDGE
•1” x 7 ¾” reversible, replaceable, reprocessed UHMW polyethylene allows 5 ¼” of total wear.
Technical Data:
- Width: Overall, Straight / Full Angle (Inches)
- 74.0 / 65.3
- Overall Height (Inches)
- 25.8
- Overall Depth, Straight (Inches)
- 31.6
- Blade Angle (Degrees)
- +/- 28
- Moldboard Thickness (Inches)
- 0.19
- Cutting Edge (Inches)
- 5/8 x 8 Bolt-on
- Blade Oscillation (Degrees)
- +/- 4
- Cylinder Bore / Stroke (Inches)
- 2.0 / 6.0
- Cylinder Pins / Hinge Pins Diameter (Inches)
- 1.0 / 1.25
- Approximate Weight* (Pounds)
- 635
- Recommended Loader Capacity
- Less than 1500 pounds
- Weight with Steel Edge installed
| Width | Weight | Height | Length |
|---|---|---|---|
| 74 Inch | 0 Gram | 25.8 Inch | 31.6 Inch |
